Sibelius 8.5 introduces staff sizes on a per-system basis

by Philip Rothman on December 1, 2016 · 11 comments

in News

update-downloadToday Avid released Sibelius 8.5, a free update for all 8.x users with an active subscription or support plan. Sibelius 8.5’s new engraving feature is one that many users have requested for years: the ability to have different staff sizes for any instrument on a per-system basis.

This new feature is controlled in the Inspector, and so the Inspector has received a bit of a makeover as well — it is the other updated item in 8.5, along with some other minor improvements and bug fixes.

Happily, and quite remarkably, the file format has not changed; Sibelius 8.5 uses the same file format in use since 8.1.

Changing staff size by system

Sibelius 8.4 laid the groundwork for improvements in this area by defining four staff sizes for use — an increase of two from previous versions. This has been retained in Sibelius 8.5. As a reminder, the Normal size is essentially the master size, and the “child sizes” are scaled proportionally to it. The note spacing algorithm is based on the Normal size.

By default, the sizes are set at:

  • Normal, set at 100%
  • Medium, set at 85%
  • Small, set at 75%
  • Extra small, set at 65%

These percentages are still not explicitly exposed to the user, and I hope this will be addressed in a forthcoming update. Instead, the sizes are expressed in absolute values and controlled in the Staff Design area in Appearance > Engraving Rules > Staves.

staff-design

You can set the staff size of any particular instrument when you set up a score for the first time and click Change Instruments, or access Add or Remove Instruments while working on your score, by selecting the size in the Staff Size column in the Staves in score table.

add-or-remove

So far, this is all the same as Sibelius 8.4.

What’s new in 8.5 is that you can override the staff size on a per-system basis by making sure that the Inspector is shown (Home > Inspector or View > Panels > Inspector or Command-Shift-I on Mac or Ctrl+Shift+I on PC) and then selecting the staff, or staves, which you wish to adjust.

Under the Bars section of the Inspector, select the desired staff size:

staff-sizes-inspector

The staff size changes accordingly, for all selected staves:

new-staff-size

You can change the staff size of one, some, or all the staves on a system, and you can choose more than one instrument/staff at a time. A few peculiarities to keep in mind:

  • When you make a staff size change on a per-system basis, Sibelius will place a system break at the beginning and end of your selection.
  • If you select only one bar and make a staff size change, Sibelius will expand your selection to the entire system.
  • These system breaks can be deleted, but in doing so you may lose any staff size changes you’ve made to that system.
  • If somehow you’ve engineered a situation where the bars on a system have the underlying properties of different staff sizes — by combining systems, for instance — Sibelius will use the staff size of the first bar in the system as the controlling display size for the entire system (for that staff).

Practically speaking, from a purely aesthetic and good engraving perspective, you probably won’t want to be changing the staff size every system. This feature is probably best used for larger orchestral scores, when, for example, you’ve added an offstage band for one number that increases the number of staves for a particular section or movement. Until now, you’d be forced to choose between reducing your staff size to a value that would be too small for most of the document, or risk vertically overcrowding the section with the added instruments. Most likely, you would have had to split the file in two and re-assemble the PDFs later (which is what I did when I engraved Aaron Copland’s Third Symphony in order to handle the crowded pages at the very end of the piece).

With this new feature in Sibelius 8.5, you can keep everything in the same document — a welcome improvement that brings this aspect of page layout into parity with similar capabilities in Finale and Dorico.

Over on the official Avid blog, senior product manager Sam Butler demonstrates a couple of scores that take advantage of the new feature, including an excerpt from an opera score by Kevin Puts nicely engraved by Bill Holab. (The examples are embedded using Avid’s Sibelius Cloud Publishing technology, which itself has undergone improvements in parallel with Sibelius.)

It’s important to know that if you change the staff size of the Normal staff by changing it in the Ribbon in Layout > Document Setup or in the Document Setup dialog, the “child” sizes scale in proportion to it. But if you change the staff size of the Normal staff in Appearance > Engraving Rules > Staves, the child sizes remain fixed. This is confusing — at least for me — and it’s another reason why I’d prefer that the child sizes be expressed in percentages relative to the Normal staff size, to make this clearer.

Finally, it’s worth mentioning that, under-the-hood, Sibelius can support more than four staff sizes. If you import a MusicXML file with more than four staff sizes (like one that can be created in Finale), Sibelius will respect those sizes. However, if you want to adjust those sizes in Sibelius, you’ll be limited to the four set sizes. I hope that a future update to Sibelius will expose these options to be user-facing for the rare but potentially clever engraver who may find them useful.

Inspector updates

Among the many interface changes in the 2011 release of Sibelius 7 was the introduction of the Inspector, a re-imagining of the Properties window in previous Sibelius versions, which is where you go to make fine adjustments to your score, control various esoteric playback settings, or (as just described) change other aspects of your layout like staff size and section breaks. Certain elements of the old Properties window found their way to the Ribbon; others were reorganized into the context-sensitive Inspector that floated above your score, appearing when called.

Sibelius 8.5 re-imagines the Inspector again. The changes are positive on the whole, but whether or not you find them beneficial may depend on your personal preference.

For one, the Inspector is now a proper panel that can be accessed via View > Panels > Inspector (it  continues to be accessible in Home > Inspector as well).

panels

The new Inspector is brighter and larger, with more generous proportions, making it easier to read, but some may miss the compactness of the old version (click for larger image):

inspector-comparison

It’s fully dockable and undockable like many of the other panels such as the Mixer and the Timeline, and it no longer needs to be pinned in order to prevent it from unintentionally closing. Like the other panels, the Inspector can be undocked by dragging it away from its docked location and docked by dragging it back (the left or right side of the score window). Alternatively, double-clicking the Inspector window title bar will toggle its docked status.

Although the Inspector is still context-sensitive, if you wish to re-size its dimensions when undocked, you’ll need to do so manually, lest you be left with large swaths of empty space:

inspector-large

The Inspector retains all the capabilities of its predecessor, and gains a few text styling and horizontal alignment functions that were previously only available on the Ribbon (they’re still there as well).

inspector-text

Other improvements and bug fixes

Improvements since Sibelius 8.4

  • It’s now possible to change Normal staff size to a smaller value then Medium staff size value in Engraving Rules. Smaller staff sizes all decrease so you can no longer get these out of order
  • Layout improvements to Engraving Rules > Staves with 200% DPI scaling on Windows
  • Making a change to a staff size in Engraving Rules, and then clicking OK (without having unfocused the staff size spin box) now makes the change in your score
  • Tuplet brackets and numbers now scale neatly when working with smaller staff sizes
  • Instrument changes from unpitched to pitched instruments now create key signatures automatically
  • MIDI input works once more after changing from an unpitched to pitched instrument
  • Canceling out of Document Setup now cancels the unit selection you may have made
  • On Retina displays only, some text fields in several dialogs are no longer too short
  • In ManuScript, note.Deselect() deselects entire parent NoteRest when it should just deselect that note

General

  • The Sibelius 8.5 trial period is now separate to previous versions of Sibelius 8
  • The version number now briefly appears on the splash screen once more
  • Improvements to Save As dialog logic on Mac, remembering the current file name and last path saved
  • Sibelius no longer hangs or crashes in rare cases when clicking Music Fonts in Edit Symbols
  • The Inspector and Timeline panel sizes and positions are now saved along with the other panels. See File > Preferences > Files in the Windows Sizes and Positions section
  • A problem has been fixed where some keyboard shortcuts didn’t work correctly on macOS Sierra
  • Sibelius Sounds and Sibelius First Sounds now correctly install on macOS Sierra
  • Application Manager 2.5.11 is now included in the Sibelius and First 8.5 installers

Installation and updating

Sibelius 8.5 will overwrite any 8.x version you have on your computer, but will leave other versions intact, unless you tell the installer to uninstall those versions. You also have the separate option of copying supporting files from Sibelius 7.5, if you’re upgrading from that version.

As mentioned earlier, Sibelius 8.5 uses the same file format as Sibelius 8.1, 8.2, 8.3, and 8.4.

If you have Sibelius 8.4 or earlier, you will be prompted to update to Sibelius 8.5 by the Application Manager. It’s free for most users of 8.x unless you bought a monthly subscription plan that has already expired.

Sibelius 8.5 will run on any 64-bit system running Windows 7 or later or Mac OS 10.9 or later. Various purchase options, including subscriptions, perpetual licenses, and upgrades are available from Avid’s online store and other resellers such as Amazon and Sweetwater.

Avid’s Scorch iPad app for Sibelius files and the newly released Sibelius First have been updated as well, to support the new staff size feature.

Did you enjoy this post? Subscribe to this blog

{ 11 comments… read them below or add one }

Falk December 1, 2016 at 1:04 PM

The Update is only shown on the avid website, but not in the Application Manager.

Reply

Bill December 1, 2016 at 2:27 PM

Choose “Sync account” from the dropdown menu

Reply

Peter Roos December 1, 2016 at 7:53 PM

Hm … that doesn’t work, but I’ll download from the Avid website.

Reply

Sam Butler December 2, 2016 at 8:48 AM

App Man should be showing the 8.5 updater now so do try again if you still need to.

Reply

Troubadixderdritte December 1, 2016 at 1:47 PM

that’s what the application manager is made for: disturbing, not working!

Reply

Grant December 1, 2016 at 2:08 PM

All great news if you’re willing to buy into Avid’s draconian update/licensing scheme. Despite having a $600 “perpetual” license, I am still required to shell out $90 for this update because my “upgrade plan” expired a week before this was released. $90 for a .5 version update is absurd, especially for a basic staff size feature that should have been included in the platform since the first release. Prospective Sibelius buyers beware.

Reply

Falk December 1, 2016 at 2:51 PM

Bill, thank you a lot!

Reply

McPrell December 1, 2016 at 5:38 PM

@Grant, when you renew your Upgrade Plan you will get a full year all future Updates and Upgrades. An expired Upgrade Plan can be renewed up to 30 days after the original expire date.

Reply

Isaac Weiss December 2, 2016 at 10:19 AM

I don’t believe it. SIbelius just *exactly* copied MuseScore’s Inspector model. So “Sibelius 8.5 re-imagines the Inspector again.” ¯\_(ツ)_/¯

Reply

Thorsten Wollmann December 4, 2016 at 1:52 AM

Dear Philip,
and where is the educational trade up offer from Sibelius First, that you described in your last Sibelius post?
I quote: “In addition, a $179 trade-up offer to the full version of Sibelius is available for educational users who already own Sibelius First, Sibelius Student, G7 or Instrumental Teacher Edition. It’s a full perpetual license of Sibelius and comes with a year of upgrades.”

Reply

Philip Rothman December 4, 2016 at 8:35 AM

Thorsten, it’s available at the link referenced in that article.

Reply

Leave a Comment

Previous post:

Next post: